Froglube 8 oz Paste

8 oz tub of Froglube *Buy now and get a FREE Micro Fiber Cleaning Cloth* 

What is froglube?

FrogLube™ is a revolutionary bio-based gun cleaner, lubricant and preservative (CLP) product made from food-grade ingredients all obtained exclusively from US suppliers. It is a new “green” product developed for government use by San Diego-based Audemous, Inc, a company that evaluates products in the emerging environmental, safety and health sector.

FrogLube™ was founded by CAPT Larry Lasky, US Navy SEAL (ret), who spent the past 32 years in service to the United States Special Operations Command, Naval Special Warfare and to the U.S. soldiers, sailors, airmen and marines whose gallant performance he attributes to every success on any mission and on any battlefield he has served. After a career of uncounted operations in every environment from jungle, to arctic, to maritime and desert, he’s seen the impact of these extremes on weapons and equipment. He felt the best equipment, products and weapons always came from combining the most arduous conditions and the solutions created by the world’s best field “operators”. He’s taken this ethos into product development with FrogLube™, a new technology lubricant designed to replace inferior and toxic petroleum-based products that foul actions, attract carbon and stick to dirt and grime.

CAPT Lasky’s experiences involved shooting or deploying troops who shot hundreds of thousands of rounds in every conceivable extreme environmental and tactical condition. In his experience, stoppages, missfeeds, fouling-caused malfunctions occur way too frequently and an area often overlooked became the source of his quest to develop FrogLube™

How does FrogLube™ work?

When a weapon is fired, carbon, lead, copper, brass and other fouling particles are produced. FrogLube™ is a heavy specific gravity food grade substance that creeps deep into the pores of the metal and acts as if to ‘season’ the surface of the bore, any friction points and all areas treated with the lube. Once treated, fouling particles can no longer bond with metal surfaces, instead, they will be suspended in a detached state and easily wiped or brushed from the surface. This also applies to other loose fouling particles such as dirt, dust and sand.

How often should I use FrogLube™?

You should follow manufacturers recommended guidelines. Make sure the weapon is unloaded before inspecting for cleaning. Cleaning weapons regularly helps maintain reliability and extends the service life. You may choose to run a bore patch through the barrel before firing or when preparing the firearm for service to test for fouling particles or a blockage. Inspect glide and friction points and cycle the action to check for smooth function.

Apply a sparing amount of FrogLube™ to glide and friction points before operation. After firing, when the barrel is hot, is a good time to insert a generous amount of FrogLube™ into the barrel as the heat will accelerate the absorption into the pores of the metal. After treatment, you will notice a marked reduction in friction. It is not necessary to do this after every use, but should be done at regular intervals. You should ensure the excess FrogLube™ is removed by running a bore patch through the bore until it is clean and smooth.

Will FrogLube™ harm non-metal surfaces such as plastic, rubber, nylon or wood? No. FrogLube™ will actually enhance the condition, moisten and preserve these materials.

Will FrogLube™ remove petroleum products, oils and grease? Yes. FrogLube™ dissolves carbon and petro-chemicals on contact. You should discontinue use of petroleum or other petrochemicals as it will conflict with the optimal performance of FrogLube™.

Will FrogLube™ harm after-market finishes, bluing or other permanent coatings such as night sights? No. In fact, it will serve as a cleaner and will provide lasting protection against oily film build-up.

Some bore cleaners recommend a time limit for application. Does that apply to FrogLube™? No. FrogLube™ may be left in place indefinitely.

Will FrogLube™ leave any residue when it dries?

No. FrogLube™ penetrates deep into the surface it contacts. Once dry, the surface will become slick to the touch. During firing, the lube will "wick" to the surface and provide a slippery and wet appearance to glide surfaces and hot spots.

Can FrogLube™ be used with airsoft and paintball guns?

Since FrogLube™ is non-corrosive to plastics and rubber, it is the preferred lubricant and preservative for O-rings, non-ferrous and rubber parts. FrogLube™ will actually condition O-rings and improve compressed air and pressure tank retention properties.

Are there any measurable benefits?

FrogLube™’s use in treating gun barrels has recorded muzzle velocity increases of between 3-12%. This has been independently verified. It has also shown drastic reductions in shot group standard deviations in 5-shot groups.

Does FrogLube™ have a pleasant fragrance?

The fragrance will improve the odor of storage containers such as gun safes, gun cases and in armories; however, it is not intense enough to be detectable in field use.

Is FrogLube™ made in the USA?

Yes. FrogLube™ was developed by US Navy SEALs. It’s ingredients are all US made. It is manufactured, stored, distributed, and retailed by US companies. There is absolutely no foreign component to this product.

Your choice of FrogLube™ will encourage US energy independence and is in compliance with White House Executive Order 13423. FrogLube™ will not be sold to those countries who violently oppose the policies and national objectives of the people United States of America.

Froglube MSDS PoliceOne Review of Froglube Click here to get directions for use