MIL-TAC MMM-1 12" W/ G10 HANDLES

The Miller Marine Model - or M3 - was designed from the outset as a general purpose field knife. The blade is 5.5" with a soft curve and just enough belly to assist with pressing into cuts. Tang thickness is 3/16" to within 1/2" of the tip when it begins to taper. Because of the blade shape, the 5.5" blade length actually allows for just about 6" of cutting edge. The balance of the knife is 5.5" of grip with shaped slaps of G10 screwed on. The grip portion is ergonomically shaped with a good finger groove and a decent press point at the top of the hilt - with ridges to increase friction when you use your thumb to push into cuts. As you can see from the photo there are two lash holes - one at either hilt tip - and a lanyard hole near the pommel. The grip slabs never get closer than 3/8" to the pommel. Add that to the pommel surface that measures 3/16" x 1" and you get a decent surface for hammering / pounding. Specifications: Weight - Blade Length - 5.5 inches Overall Length - 12 inches Blade Material - Blasted Stainless S30V Steel Handle Material - 3D Machined G10 Sheath - Spec Ops Brand Nylon Tactical with Kydex insert